/* * lid.h * * Line Interface Device * * Open Phone Abstraction Library * * Copyright (c) 1999-2001 Equivalence Pty. Ltd. * * The contents of this file are subject to the Mozilla Public License * Version 1.0 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See * the License for the specific language governing rights and limitations * under the License. * * The Original Code is Open H323 Library. * * The Initial Developer of the Original Code is Equivalence Pty. Ltd. * * Portions of this code were written with the assisance of funding from * Quicknet Technologies, Inc. http://www.quicknet.net. * * Contributor(s): ______________________________________. * * $Revision: 21328 $ * $Author: rjongbloed $ * $Date: 2008-10-14 10:50:19 +0000 (Tue, 14 Oct 2008) $ */ #ifndef OPAL_LIDS_LID_H #define OPAL_LIDS_LID_H #ifdef P_USE_PRAGMA #pragma interface #endif #include #include /////////////////////////////////////////////////////////////////////////////// /** Line Interface Device abstraction. Note all functions in this device abstraction are assumed to be thread atomic. */ class OpalLineInterfaceDevice : public PObject { PCLASSINFO(OpalLineInterfaceDevice, PObject); public: /**Construct a new line interface device. */ OpalLineInterfaceDevice(); /**Open the line interface device. */ virtual PBoolean Open( const PString & device ///< Device identifier name. ) = 0; /**Determine if the line interface device is open. */ virtual PBoolean IsOpen() const; /**Close the line interface device. */ virtual PBoolean Close(); /**Get the device type identifier. This is as is used in the factory registration. */ virtual PString GetDeviceType() const = 0; /**Get the device name, as used to open the device. Note the format of this name should be as is returned from GetAllName() and must be able to be used in a subsequent Open() call. */ virtual PString GetDeviceName() const = 0; /**Get all the possible devices that can be opened. */ virtual PStringArray GetAllNames() const = 0; /**Get the description of the line interface device. This is a string indication of the card type for user interface display purposes or device specific control. The device should be as detailed as possible eg "Quicknet LineJACK". */ virtual PString GetDescription() const = 0; /**Get the total number of lines supported by this device. */ virtual unsigned GetLineCount() const = 0; /**Get the type of the line. A "terminal" line is one where a call may terminate. For example a POTS line with a standard telephone handset on it would be a terminal line. The alternative is a "network" line, that is one connected to switched network eg the standard PSTN. */ virtual PBoolean IsLineTerminal( unsigned line ///< Number of line ) = 0; /**Determine if a physical line is present on the logical line. */ virtual PBoolean IsLinePresent( unsigned line, ///< Number of line PBoolean force = PFalse ///< Force test, do not optimise ); /**Determine if line is currently off hook. This function implies that the state is debounced and that a return value of PTrue indicates that the phone is really off hook. That is hook flashes and winks are masked out. */ virtual PBoolean IsLineOffHook( unsigned line ///< Number of line ) = 0; /**Set the hook state of the line. Note that not be possible on a given line, for example a POTS line with a standard telephone handset. The hook state is determined by external hardware and cannot be changed by the software. */ virtual PBoolean SetLineOffHook( unsigned line, ///< Number of line PBoolean newState = PTrue ///< New state to set ) = 0; /**Set the hook state of the line. This is the complement of SetLineOffHook(). */ virtual PBoolean SetLineOnHook( unsigned line ///< Number of line ) { return SetLineOffHook(line, PFalse); } /**Set the hook state off then straight back on again. This will only operate if the line is currently off hook. */ virtual PBoolean HookFlash( unsigned line, ///< Number of line unsigned flashTime = 200 ///< Time for hook flash in milliseconds ); /**Return PTrue if a hook flash has been detected */ virtual PBoolean HasHookFlash(unsigned line); /**Determine if line is ringing. This function implies that the state is "debounced" and that a return value of PTrue indicates that the phone is still ringing and it is not simply a pause in the ring cadence. If cadence is not NULL then it is set with the bit pattern for the incoming ringing. Note that in this case the funtion may take a full sequence to return. If it is NULL it can be assumed that the function will return quickly. */ virtual PBoolean IsLineRinging( unsigned line, ///< Number of line DWORD * cadence = NULL ///< Cadence of incoming ring ); /**Begin ringing local phone set with specified cadence. If nCadence is zero then stops ringing. Note that this may not be possible on a given line, for example on a PSTN line the ring state is determined by external hardware and cannot be changed by the software. Also note that the cadence may be ignored by particular hardware driver so that only the zero or non-zero values are significant. The ring pattern is an array of millisecond times for on and off parts of the cadence. Thus the Australian ring cadence would be represented by the array unsigned AusRing[] = { 400, 200, 400, 2000 } If the nCadence in non-zero and the pattern parameter is NULL, then the standard ring pattern for the selected country is used. */ virtual PBoolean RingLine( unsigned line, ///< Number of line PINDEX nCadence, ///< Number of entries in cadence array const unsigned * pattern = NULL, ///< Ring pattern times unsigned frequency = 400 ///< Frequency of ring (if relevant) ); /**Indicate to the POTS handset that the call is connected. This uses the hardware (and country) dependent means to indicate to the remote end of a POTS connection that we have answerd. Typically this is a "polarity reversal" but other techniques may be used. The "connected" state remains in force till the remote disconnects the call, though hanging up. Returns true if successful, always returns false for PSTN lines. */ virtual PBoolean SetLineConnected( unsigned line ///< Number of line ); /**Determine if remote has answered call on line. This uses the hardware (and country) dependent means for determining if the remote end of a PSTN connection has answered. Typically this is a "polarity reversal" but other techniques may be used. It should be noted that IsLineConnected() is not exactly the same thing as !IsLineDisconnected(). For a POTS port this is equivalent to IsLineOffHook(). */ virtual PBoolean IsLineConnected( unsigned line ///< Number of line ); /**Determine if line has been disconnected from a call. This uses the hardware (and country) dependent means for determining if the remote end of a PSTN connection has hung up. For example a "wink" or "K break" which is a short drop in line voltage similar to (though opposite in sense) toa hook flash. It should be noted that IsLineDisconnected() is not exactly the same thing as !IsLineConnected(). For a POTS port this is equivalent to !IsLineOffHook(). */ virtual PBoolean IsLineDisconnected( unsigned line, ///< Number of line PBoolean checkForWink = PTrue ); /**Directly connect the two lines. */ virtual PBoolean SetLineToLineDirect( unsigned line1, ///< Number of first line unsigned line2, ///< Number of second line PBoolean connect ///< Flag for connect/disconnect ); /**Determine if the two lines are directly connected. */ virtual PBoolean IsLineToLineDirect( unsigned line1, ///< Number of first line unsigned line2 ///< Number of second line ); /**Get the media formats this device is capable of using. */ virtual OpalMediaFormatList GetMediaFormats() const = 0; /**Set the media format (codec) for reading on the specified line. */ virtual PBoolean SetReadFormat( unsigned line, ///< Number of line const OpalMediaFormat & mediaFormat ///< Codec type ) = 0; /**Set the media format (codec) for writing on the specified line. */ virtual PBoolean SetWriteFormat( unsigned line, ///< Number of line const OpalMediaFormat & mediaFormat ///< Codec type ) = 0; /**Get the media format (codec) for reading on the specified line. */ virtual OpalMediaFormat GetReadFormat( unsigned line ///< Number of line ) = 0; /**Get the media format (codec) for writing on the specified line. */ virtual OpalMediaFormat GetWriteFormat( unsigned line ///< Number of line ) = 0; /**Stop the read codec. */ virtual PBoolean StopReading( unsigned line ///< Number of line ); /**Stop the write codec. */ virtual PBoolean StopWriting( unsigned line ///< Number of line ); /**Indicate that ReadFrame() & WriteFrame() take whole RTP packets. Note that if this returns true, SetReadFrameSize(), SetWriteFrameSize(), GetReadFrameSize() and GetWriteFrameSize() are no longer relevant. */ virtual bool UsesRTP() const; /**Set the read frame size in bytes. Note that a LID may ignore this value so always use GetReadFrameSize() for I/O. */ virtual PBoolean SetReadFrameSize( unsigned line, ///< Number of line PINDEX frameSize ///< New frame size ); /**Set the write frame size in bytes. Note that a LID may ignore this value so always use GetReadFrameSize() for I/O. */ virtual PBoolean SetWriteFrameSize( unsigned line, ///< Number of line PINDEX frameSize ///< New frame size ); /**Get the read frame size in bytes. All calls to ReadFrame() will return this number of bytes. */ virtual PINDEX GetReadFrameSize( unsigned line ///< Number of line ); /**Get the write frame size in bytes. All calls to WriteFrame() must be this number of bytes. */ virtual PINDEX GetWriteFrameSize( unsigned line ///< Number of line ); /**Low level read of a frame from the device. */ virtual PBoolean ReadFrame( unsigned line, ///< Number of line void * buf, ///< Pointer to a block of memory to receive data. PINDEX & count ///< Number of bytes read, <= GetReadFrameSize() ) = 0; /**Low level write frame to the device. */ virtual PBoolean WriteFrame( unsigned line, ///< Number of line const void * buf, ///< Pointer to a block of memory to write. PINDEX count, ///< Number of bytes to write, <= GetWriteFrameSize() PINDEX & written ///< Number of bytes written, <= GetWriteFrameSize() ) = 0; /**High level read of audio data from the device. This version will allow non-integral number of frames to be read. */ virtual PBoolean ReadBlock( unsigned line, ///< Number of line void * buf, ///< Pointer to a block of memory to receive the read bytes. PINDEX count ///< Count of bytes to read. ); /**High level write audio data to the device. */ virtual PBoolean WriteBlock( unsigned line, ///< Number of line const void * buf, ///< Pointer to a block of memory to write. PINDEX count ///< Count of bytes to write. ); /**Get average signal level in last frame. */ virtual unsigned GetAverageSignalLevel( unsigned line, ///< Number of line PBoolean playback ///< Get average playback or record level. ); /**Enable audio for the line. */ virtual PBoolean EnableAudio( unsigned line, ///< Number of line PBoolean enable = PTrue ); /**Disable audio for the line. */ PBoolean DisableAudio( unsigned line ///< Number of line ) { return EnableAudio(line, PFalse); } /**Determine if audio for the line is enabled. */ virtual PBoolean IsAudioEnabled( unsigned line ///< Number of line ) const; enum { MaxVolume = 100 }; /**Set volume level for recording. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean SetRecordVolume( unsigned line, ///< Number of line unsigned volume ///< Volume level from 0 to 100% ); /**Set volume level for playing. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean SetPlayVolume( unsigned line, ///< Number of line unsigned volume ///< Volume level from 0 to 100% ); /**Get volume level for recording. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean GetRecordVolume( unsigned line, ///< Number of line unsigned & volume ///< Volume level from 0 to 100% ); /**Set volume level for playing. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean GetPlayVolume( unsigned line, ///< Number of line unsigned & volume ///< Volume level from 0 to 100% ); enum AECLevels { AECOff, AECLow, AECMedium, AECHigh, AECAuto, AECAGC, AECError }; /**Get acoustic echo cancellation. Note, not all devices may support this function. */ virtual AECLevels GetAEC( unsigned line ///< Number of line ) const; /**Set acoustic echo cancellation. Note, not all devices may support this function. */ virtual PBoolean SetAEC( unsigned line, ///< Number of line AECLevels level ///< AEC level ); /**Get voice activity detection. Note, not all devices, or selected codecs, may support this function. */ virtual PBoolean GetVAD( unsigned line ///< Number of line ) const; /**Set voice activity detection. Note, not all devices, or selected codecs, may support this function. */ virtual PBoolean SetVAD( unsigned line, ///< Number of line PBoolean enable ///< Flag for enabling VAD ); /**Get Caller ID from the last incoming ring. The idString parameter is either simply the "number" field of the caller ID data, or if full is true, all of the fields in the caller ID data. The full data of the caller ID string consists fields separated by tab characters ('\t'), the first three are always the Calling Line Identity (CLI or calling number), the date and the Calling Line Name field. Other fields may follow and are the of the form name=value. The values are LID dependent. A false is returned if there is no Caller ID information available, e.g. if no ring has occurred. */ virtual PBoolean GetCallerID( unsigned line, ///< Number of line PString & idString, ///< ID string returned PBoolean full = PFalse ///< Get full information in idString ); /**Set Caller ID information. The idString must be as a minimum a number fields for the Calling Line Identity. The full data of the caller ID string consists fields separated by tab characters ('\t'), the first three are always the Calling Line Identity (CLI or calling number), the date and the Calling Line Name field. Other fields may follow and are the of the form name=value. The values are LID dependent. If the date field is missing (e.g. two consecutive tabs) then the current time and date is used. Using an empty string will clear the caller ID so that no caller ID is sent on the next RingLine() call. if the line is on hook then this information is sent when the next RingLine() function is called to start a ring cycle. Note that if the Ring cycle had already been started then this function may return false. If the line is off hook, then a Caller ID on Message Waiting is sent, if supported by the LID, otherwise false is returned. */ virtual PBoolean SetCallerID( unsigned line, ///< Number of line const PString & idString ///< ID string to use ); /**Send a Visual Message Waiting Indicator */ virtual PBoolean SendVisualMessageWaitingIndicator( unsigned line, ///< Number of line PBoolean on ); enum { DefaultDTMFOnTime = 150, DefaultDTMFOffTime = 50 }; /**Play a DTMF digit. Any characters that are not in the set 0-9, A-D, * or # will be ignored. */ virtual PBoolean PlayDTMF( unsigned line, ///< Number of line const char * digits, ///< DTMF digits to be played DWORD onTime = DefaultDTMFOnTime, ///< Number of milliseconds to play each DTMF digit DWORD offTime = DefaultDTMFOffTime ///< Number of milliseconds between digits ); /**Read a DTMF digit detected. This may be characters from the set 0-9, A-D, * or #. A null ('\0') character indicates that there are no tones in the queue. Characters E through P indicate the following tones: E = 800 F = 1000 G = 1250 H = 950 I = 1100 J = 1400 K = 1500 L = 1600 M = 1800 N = 2100 O = 1300 P = 2450 */ virtual char ReadDTMF( unsigned line ///< Number of line ); /**Get DTMF removal mode. When set in this mode the DTMF tones detected are removed from the encoded data stream as returned by ReadFrame(). */ virtual PBoolean GetRemoveDTMF( unsigned line ///< Number of line ); /**Set DTMF removal mode. When set in this mode the DTMF tones detected are removed from the encoded data stream as returned by ReadFrame(). */ virtual PBoolean SetRemoveDTMF( unsigned line, ///< Number of line PBoolean removeTones ///< Flag for removing DTMF tones. ); enum CallProgressTones { NoTone = -1, // indicates no tones DialTone, // Dial tone RingTone, // Ring indication tone BusyTone, // Line engaged tone CongestionTone,// aka fast busy tone ClearTone, // Call failed/disconnected tone (often same as busy tone) MwiTone, // Message Waiting Tone RoutingTone, // Call is being routed (not normal for PSTN, but VoIP can take a while) CNGTone, // Fax CNG tone CEDTone, // Fax CED tone UserDefinedTone, NumTones }; /**See if any tone is detected. */ virtual CallProgressTones IsToneDetected( unsigned line ///< Number of line ); /**See if any tone is detected. */ virtual CallProgressTones WaitForToneDetect( unsigned line, ///< Number of line unsigned timeout = 3000 ///< Milliseconds to wait for ); /**See if a specific tone is detected. */ virtual PBoolean WaitForTone( unsigned line, ///< Number of line CallProgressTones tone, ///< Tone to wait for unsigned timeout = 3000 ///< Milliseconds to wait for ); /**Set a calling tones description. This sets the calling tone infromation for both wtah is emitted by PlayTone and what is detected by IsToneDetected(). The description string is of the form frequency ':' cadence where frequency is either frequency play tone, detect +/- 5% low '-' high play tone halfway, but detect anything in range low '+' high play both tones, detect anything in range low 'x' high play tone1 modulated by tone2, detect twice modulation range and cadence is mintime ontime '-' offtime ontime '-' offtime '-' ontime '-' offtime examples: 300:0.25 300Hz for minimum 250ms 1100:0.4-0.4 1100Hz with cadence 400ms on, 400ms off 900-1300:1.5 900Hz to 1300Hz for minimum of 1.5 seconds 425:0.4-0.2-0.4-2 425Hz with cadence 400ms on, 200ms off, 400ms on, 2 seconds off */ virtual bool SetToneDescription( unsigned line, ///< Number of line CallProgressTones tone, ///< Tone filter to change const PString & description ///< Description of filter parameters ); enum ToneMixingModes { SimpleTone, AddedTone, ModulatedTone }; /**Set calling tones filter parameters. Note this function is misnamed as it can also set the calling tone to be output by PlayTone(). */ virtual bool SetToneParameters( unsigned line, ///< Number of line CallProgressTones tone, ///< Tone filter to change unsigned frequency1, ///< Usually low frequency unsigned frequency2, ///< Usually high frequency ToneMixingModes mode, ///< Mode for how freqencies are mixed, -1 is PINDEX numCadences, ///< Number of cadence times const unsigned * onTimes, ///< Cadence ON times const unsigned * offTimes ///< Cadence OFF times ); /**Play a tone. */ virtual PBoolean PlayTone( unsigned line, ///< Number of line CallProgressTones tone ///< Tone to be played ); /**Determine if a tone is still playing */ virtual PBoolean IsTonePlaying( unsigned line ///< Number of line ); /**Stop playing a tone. */ virtual PBoolean StopTone( unsigned line ///< Number of line ); /** Structure for dialling parameters */ struct DialParams { DialParams() : m_requireTones(false) , m_dialToneTimeout(2500) , m_dialStartDelay(500) , m_dialDigitTime(DefaultDTMFOnTime) , m_dialInterDigitTime(DefaultDTMFOffTime) , m_progressTimeout(5000) , m_commaDelay(2000) { } bool m_requireTones; ///< Require dial/ring tone to be detected unsigned m_dialToneTimeout; ///< Time in msec to wait for a dial tone to be detected unsigned m_dialStartDelay; ///< Time in msec to wait between the dial tone detection and dialing the DTMF unsigned m_dialDigitTime; ///< Time in msec to play DTMF digit unsigned m_dialInterDigitTime;///< Time in msec of silence between each DTMF digit unsigned m_progressTimeout; ///< Time in msec to wait for a progress tone (ring, busy or connected) to be detected unsigned m_commaDelay; ///< Time in msec to wait when a comma (',') is found in the dial string }; /**Dial a number on network line. The takes the line off hook, waits for dial tone, and transmits the specified number as DTMF tones. If the requireTones flag is PTrue the call is aborted of the call progress tones are not detected. Otherwise the call proceeds with short delays while it tries to detect the call progress tones. The return code indicates the following: DialTone No dial tone detected RingTone Dial was successful BusyTone The remote phone was busy ClearTone Dial failed (usually means rang out) NoTone There was an internal error making the call */ virtual CallProgressTones DialOut( unsigned line, ///< Number of line const PString & number, ///< Number to dial const DialParams & params = DialParams() ///< Optional parameters for dial out. ); /**Get wink detect minimum duration. This is the signal used by telcos to end PSTN call. */ virtual unsigned GetWinkDuration( unsigned line ///< Number of line ); /**Set wink detect minimum duration. This is the signal used by telcos to end PSTN call. */ virtual PBoolean SetWinkDuration( unsigned line, ///< Number of line unsigned winkDuration ///< New minimum duration ); enum T35CountryCodes { Japan, Albania, Algeria, AmericanSamoa, Germany, Anguilla, AntiguaAndBarbuda, Argentina, Ascension, Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Benin, Bermudas, Bhutan, Bolivia, Botswana, Brazil, BritishAntarcticTerritory, BritishIndianOceanTerritory, BritishVirginIslands, BruneiDarussalam, Bulgaria, Myanmar, Burundi, Byelorussia, Cameroon, Canada, CapeVerde, CaymanIslands, CentralAfricanRepublic, Chad, Chile, China, Colombia, Comoros, Congo, CookIslands, CostaRica, Cuba, Cyprus, Czechoslovakia, Cambodia, DemocraticPeoplesRepublicOfKorea, Denmark, Djibouti, DominicanRepublic, Dominica, Ecuador, Egypt, ElSalvador, EquatorialGuinea, Ethiopia, FalklandIslands, Fiji, Finland, France, FrenchPolynesia, FrenchSouthernAndAntarcticLands, Gabon, Gambia, Germany2, Angola, Ghana, Gibraltar, Greece, Grenada, Guam, Guatemala, Guernsey, Guinea, GuineaBissau, Guayana, Haiti, Honduras, Hongkong, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, CotedIvoire, Jamaica, Afghanistan, Jersey, Jordan, Kenya, Kiribati, KoreaRepublic, Kuwait, Lao, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Luxemborg, Macao, Madagascar, Malaysia, Malawi, Maldives, Mali, Malta, Mauritania, Mauritius, Mexico, Monaco, Mongolia, Montserrat, Morocco, Mozambique, Nauru, Nepal, Netherlands, NetherlandsAntilles, NewCaledonia, NewZealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Panama, PapuaNewGuinea, Paraguay, Peru, Philippines, Poland, Portugal, PuertoRico, Qatar, Romania, Rwanda, SaintKittsAndNevis, SaintCroix, SaintHelenaAndAscension, SaintLucia, SanMarino, SaintThomas, SaoTomeAndPrincipe, SaintVicentAndTheGrenadines, SaudiArabia, Senegal, Seychelles, SierraLeone, Singapore, SolomonIslands, Somalia, SouthAfrica, Spain, SriLanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tanzania, Thailand, Togo, Tonga, TrinidadAndTobago, Tunisia, Turkey, TurksAndCaicosIslands, Tuvalu, Uganda, Ukraine, UnitedArabEmirates, UnitedKingdom, UnitedStates, BurkinaFaso, Uruguay, USSR, Vanuatu, VaticanCityState, Venezuela, VietNam, WallisAndFutuna, WesternSamoa, Yemen, Yemen2, Yugoslavia, Zaire, Zambia, Zimbabwe, NumCountryCodes, UnknownCountry = -1 }; /**Get the country code set for the device. */ T35CountryCodes GetCountryCode() const { return countryCode; } /**Get the country code set for the device as a string. */ PString GetCountryCodeName() const; /**Get the country code set for the device as a string. */ static PString GetCountryCodeName(T35CountryCodes code); static T35CountryCodes GetCountryCode(const PString & name); /**Set the country code set for the device. This may change the line analogue coefficients, ring detect, call disconnect detect and call progress tones to fit the countries telephone network. */ virtual PBoolean SetCountryCode( T35CountryCodes country ///< COuntry code for device ); /**Set the country code set for the device. */ virtual PBoolean SetCountryCodeName( const PString & countryName ///< COuntry code for device ); /**Get the list of countries actually supported by the device */ virtual PStringList GetCountryCodeNameList() const; /**Play a wav file */ virtual PBoolean PlayAudio( unsigned line, ///< Number of line const PString & filename ///< File Name ); /**Stop playing the Wave File */ virtual PBoolean StopAudio( unsigned line ///Number of line ); /** * start recording audio */ virtual PBoolean RecordAudioStart( unsigned line, /// line const PString & filename /// File Name ); /** * stop recording audio */ virtual PBoolean RecordAudioStop( unsigned line /// line ); /**Return number for last error. */ int GetErrorNumber() const { return osError; } /**Return text for last error. */ PString GetErrorText() const; virtual void PrintOn( ostream & strm ) const; /**Create a new device from the registration string */ static OpalLineInterfaceDevice * Create( const PString & type, ///< Type of device to create void * parameters = NULL ///< Arbitrary parameters for the LID ); /**Create a new device and open it given the descriptor string. The descriptor consists of the device type, a ':' character and then the specific device name. */ static OpalLineInterfaceDevice * CreateAndOpen( const PString & descriptor, ///< Type of device to create void * parameters = NULL ///< Arbitrary parameters for the LID ); /**Return an array of all the LID types registered. */ static PStringList GetAllTypes(); /**Return an array of all the LID types registered and all of the possible devices each one can open. Each string will be of the form "type: name" eg "Quicknet: 3211FFFF" */ static PStringList GetAllDevices(); protected: int os_handle; mutable int osError; T35CountryCodes countryCode; PBYTEArray m_readDeblockingBuffer, m_writeDeblockingBuffer; PINDEX m_readDeblockingOffset, m_writeDeblockingOffset; std::vector m_LineAudioEnabled; PString m_callProgressTones[NumTones]; #if PTRACING friend ostream & operator<<(ostream & o, CallProgressTones t); #endif }; PLIST(OpalLIDList, OpalLineInterfaceDevice); /**This class describes the LID based codec capability. */ class OpalLine : public PObject { PCLASSINFO(OpalLine, PObject); public: /**@name Construction */ //@{ /**Create a new telephone line. */ OpalLine( OpalLineInterfaceDevice & device, ///< Device to make connection with unsigned lineNumber, ///< number of line on LID const char * userToken = NULL ///< Unique token string for line ); //@} /**@name Overrides from PObject */ //@{ /**Standard stream print function. The PObject class has a << operator defined that calls this function polymorphically. */ void PrintOn( ostream & strm ///< Stream to output text representation ) const; //@} /**@name Basic operations */ //@{ /**Get the type of the line. A "terminal" line is one where a call may terminate. For example a POTS line with a standard telephone handset on it would be a terminal line. The alternative is a "network" line, that is one connected to switched network eg the standard PSTN. */ virtual PBoolean IsTerminal() { return device.IsLineTerminal(lineNumber); } /**Determine if a physical line is present on the logical line. */ virtual PBoolean IsPresent( PBoolean force = PFalse ///< Force test, do not optimise ) { return device.IsLinePresent(lineNumber, force); } /**Determine if line is currently off hook. This function implies that the state is debounced and that a return value of PTrue indicates that the phone is really off hook. That is hook flashes and winks are masked out. */ virtual PBoolean IsOffHook() { return device.IsLineOffHook(lineNumber); } /**Set the hook state of the line. Note that not be possible on a given line, for example a POTS line with a standard telephone handset. The hook state is determined by external hardware and cannot be changed by the software. */ virtual PBoolean SetOffHook() { return device.SetLineOffHook(lineNumber, PTrue); } /**Set the hook state of the line. This is the complement of SetLineOffHook(). */ virtual PBoolean SetOnHook() { return device.SetLineOffHook(lineNumber, PFalse); } /**Set the hook state off then straight back on again. This will only operate if the line is currently off hook. */ virtual PBoolean HookFlash( unsigned flashTime = 200 ///< Time for hook flash in milliseconds ) { return device.HookFlash(lineNumber, flashTime); } /**Return PTrue if a hook flash has been detected */ virtual PBoolean HasHookFlash() { return device.HasHookFlash(lineNumber); } /**Determine if line is ringing. This function implies that the state is "debounced" and that a return value of PTrue indicates that the phone is still ringing and it is not simply a pause in the ring cadence. If cadence is not NULL then it is set with the bit pattern for the incoming ringing. Note that in this case the funtion may take a full sequence to return. If it is NULL it can be assumed that the function will return quickly. */ virtual PBoolean IsRinging( DWORD * cadence = NULL ///< Cadence of incoming ring ); /**Get the number of rings. If the line is ringing then */ virtual unsigned GetRingCount( DWORD * cadence = NULL ///< Cadence of incoming ring ); /**Begin ringing local phone set with specified cadence. If nCadence is zero then stops ringing. Note that this may not be possible on a given line, for example on a PSTN line the ring state is determined by external hardware and cannot be changed by the software. Also note that the cadence may be ignored by particular hardware driver so that only the zero or non-zero values are significant. The ring pattern is an array of millisecond times for on and off parts of the cadence. Thus the Australian ring cadence would be represented by the array unsigned AusRing[] = { 400, 200, 400, 2000 } If the nCadence in non-zero and the pattern parameter is NULL, then the standard ring pattern for the selected country is used. */ virtual PBoolean Ring( PINDEX nCadence, ///< Number of entries in cadence array const unsigned * pattern = NULL, ///< Ring pattern times unsigned frequency = 400 ///< Frequency of ring (if relevant) ) { return device.RingLine(lineNumber, nCadence, pattern, frequency); } /**Indicate to the POTS handset that the call is connected. This uses the hardware (and country) dependent means to indicate to the remote end of a POTS connection that we have answerd. Typically this is a "polarity reversal" but other techniques may be used. The "connected" state remains in force till the remote disconnects the call, though hanging up. Returns true if successful, always returns false for PSTN lines. */ virtual PBoolean SetConnected() { return device.SetLineConnected(lineNumber); } /**Determine if remote has answered call on line. This uses the hardware (and country) dependent means for determining if the remote end of a PSTN connection has answered. Typically this is a "polarity reversal" but other techniques may be used. For a POTS port this is equivalent to IsLineOffHook(). */ virtual PBoolean IsConnected() { return device.IsLineConnected(lineNumber); } /**Determine if line has been disconnected from a call. This uses the hardware (and country) dependent means for determining */ virtual PBoolean IsDisconnected() { return device.IsLineDisconnected(lineNumber); } /**Set the media format (codec) for reading on the specified line. */ virtual PBoolean SetReadFormat( const OpalMediaFormat & mediaFormat ///< Codec type ) { return device.SetReadFormat(lineNumber, mediaFormat); } /**Set the media format (codec) for writing on the specified line. */ virtual PBoolean SetWriteFormat( const OpalMediaFormat & mediaFormat ///< Codec type ) { return device.SetWriteFormat(lineNumber, mediaFormat); } /**Get the media format (codec) for reading on the specified line. */ virtual OpalMediaFormat GetReadFormat() { return device.GetReadFormat(lineNumber); } /**Get the media format (codec) for writing on the specified line. */ virtual OpalMediaFormat GetWriteFormat() { return device.GetWriteFormat(lineNumber); } /**Stop the read codec. */ virtual PBoolean StopReading() { return device.StopReading(lineNumber); } /**Stop the write codec. */ virtual PBoolean StopWriting() { return device.StopWriting(lineNumber); } /**Set the read frame size in bytes. Note that a LID may ignore this value so always use GetReadFrameSize() for I/O. */ virtual PBoolean SetReadFrameSize( PINDEX frameSize ///< New frame size ) { return device.SetReadFrameSize(lineNumber, frameSize); } /**Set the write frame size in bytes. Note that a LID may ignore this value so always use GetReadFrameSize() for I/O. */ virtual PBoolean SetWriteFrameSize( PINDEX frameSize ///< New frame size ) { return device.SetWriteFrameSize(lineNumber, frameSize); } /**Get the read frame size in bytes. All calls to ReadFrame() will return this number of bytes. */ virtual PINDEX GetReadFrameSize() { return device.GetReadFrameSize(lineNumber); } /**Get the write frame size in bytes. All calls to WriteFrame() must be this number of bytes. */ virtual PINDEX GetWriteFrameSize() { return device.GetWriteFrameSize(lineNumber); } /**Low level read of a frame from the device. */ virtual PBoolean ReadFrame( void * buf, ///< Pointer to a block of memory to receive data. PINDEX & count ///< Number of bytes read, <= GetReadFrameSize() ) { return device.ReadFrame(lineNumber, buf, count); } /**Low level write frame to the device. */ virtual PBoolean WriteFrame( const void * buf, ///< Pointer to a block of memory to write. PINDEX count, ///< Number of bytes to write, <= GetWriteFrameSize() PINDEX & written ///< Number of bytes written, <= GetWriteFrameSize() ) { return device.WriteFrame(lineNumber, buf, count, written); } /**High level read of audio data from the device. This version will allow non-integral number of frames to be read. */ virtual PBoolean ReadBlock( void * buf, ///< Pointer to a block of memory to receive the read bytes. PINDEX count ///< Count of bytes to read. ) { return device.ReadBlock(lineNumber, buf, count); } /**High level write audio data to the device. */ virtual PBoolean WriteBlock( const void * buf, ///< Pointer to a block of memory to write. PINDEX count ///< Count of bytes to write. ) { return device.WriteBlock(lineNumber, buf, count); } /**Get average signal level in last frame. */ virtual unsigned GetAverageSignalLevel( PBoolean playback ///< Get average playback or record level. ) { return device.GetAverageSignalLevel(lineNumber, playback); } /**Enable audio for the line. */ virtual PBoolean EnableAudio( PBoolean enable = PTrue ) { return device.EnableAudio(lineNumber, enable); } /**Disable audio for the line. */ PBoolean DisableAudio() { return EnableAudio(PFalse); } /**Determine if audio is ebabled for the line. */ virtual PBoolean IsAudioEnabled() const { return device.IsAudioEnabled(lineNumber); } /**Set volume level for recording. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean SetRecordVolume( unsigned volume ///< Volume level from 0 to 100% ) { return device.SetRecordVolume(lineNumber, volume); } /**Set volume level for playing. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean SetPlayVolume( unsigned volume ///< Volume level from 0 to 100% ) { return device.SetPlayVolume(lineNumber, volume); } /**Get volume level for recording. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean GetRecordVolume( unsigned & volume ///< Volume level from 0 to 100% ) { return device.GetRecordVolume(lineNumber, volume); } /**Set volume level for playing. A value of 100 is the maximum volume possible for the hardware. A value of 0 is the minimum volume possible for the hardware. */ virtual PBoolean GetPlayVolume( unsigned & volume ///< Volume level from 0 to 100% ) { return device.GetPlayVolume(lineNumber, volume); } /**Get acoustic echo cancellation. Note, not all devices may support this function. */ virtual OpalLineInterfaceDevice::AECLevels GetAEC() const { return device.GetAEC(lineNumber); } /**Set acoustic echo cancellation. Note, not all devices may support this function. */ virtual PBoolean SetAEC( OpalLineInterfaceDevice::AECLevels level ///< AEC level ) { return device.SetAEC(lineNumber, level); } /**Get voice activity detection. Note, not all devices, or selected codecs, may support this function. */ virtual PBoolean GetVAD() const { return device.GetVAD(lineNumber); } /**Set voice activity detection. Note, not all devices, or selected codecs, may support this function. */ virtual PBoolean SetVAD( PBoolean enable ///< Flag for enabling VAD ) { return device.SetVAD(lineNumber, enable); } /**Get Caller ID from the last incoming ring. The idString parameter is either simply the "number" field of the caller ID data, or if full is true, all of the fields in the caller ID data. The full data of the caller ID string consists fields separated by tab characters ('\t'), the first three are always the Calling Line Identity (CLI or calling number), the date and the Calling Line Name field. Other fields may follow and are the of the form name=value. The values are LID dependent. A false is returned if there is no Caller ID information available, e.g. if no ring has occurred. */ virtual PBoolean GetCallerID( PString & idString, ///< ID string returned PBoolean full = PFalse ///< Get full information in idString ) { return device.GetCallerID(lineNumber, idString, full); } /**Set Caller ID information. The idString must be as a minimum a number fields for the Calling Line Identity. The full data of the caller ID string consists fields separated by tab characters ('\t'), the first three are always the Calling Line Identity (CLI or calling number), the date and the Calling Line Name field. Other fields may follow and are the of the form name=value. The values are LID dependent. If the date field is missing (e.g. two consecutive tabs) then the current time and date is used. Using an empty string will clear the caller ID so that no caller ID is sent on the next RingLine() call. if the line is on hook then this information is sent when the next RingLine() function is called to start a ring cycle. Note that if the Ring cycle had already been started then this function may return false. If the line is off hook, then a Caller ID on Message Waiting is sent, if supported by the LID, otherwise false is returned. */ virtual PBoolean SetCallerID( const PString & idString ///< ID string to use ) { return device.SetCallerID(lineNumber, idString); } /**Send a Visual Message Waiting Indicator */ virtual PBoolean SendVisualMessageWaitingIndicator( PBoolean on ) { return device.SendVisualMessageWaitingIndicator(lineNumber, on); } /**Play a DTMF digit. Any characters that are not in the set 0-9, A-D, * or # will be ignored. */ virtual PBoolean PlayDTMF( const char * digits, ///< DTMF digits to be played DWORD onTime = OpalLineInterfaceDevice::DefaultDTMFOnTime, ///< Number of milliseconds to play each DTMF digit DWORD offTime = OpalLineInterfaceDevice::DefaultDTMFOffTime ///< Number of milliseconds between digits ) { return device.PlayDTMF(lineNumber, digits, onTime, offTime); } /**Read a DTMF digit detected. This may be characters from the set 0-9, A-D, * or #. A null ('\0') character indicates that there are no tones in the queue. Characters E through P indicate the following tones: E = 800 F = 1000 G = 1250 H = 950 I = 1100 J = 1400 K = 1500 L = 1600 M = 1800 N = 2100 O = 1300 P = 2450 */ virtual char ReadDTMF() { return device.ReadDTMF(lineNumber); } /**Get DTMF removal mode. When set in this mode the DTMF tones detected are removed from the encoded data stream as returned by ReadFrame(). */ virtual PBoolean GetRemoveDTMF() { return device.GetRemoveDTMF(lineNumber); } /**Set DTMF removal mode. When set in this mode the DTMF tones detected are removed from the encoded data stream as returned by ReadFrame(). */ virtual PBoolean SetRemoveDTMF( PBoolean removeTones ///< Flag for removing DTMF tones. ) { return device.SetRemoveDTMF(lineNumber, removeTones); } /**See if any tone is detected. */ virtual OpalLineInterfaceDevice::CallProgressTones IsToneDetected() { return device.IsToneDetected(lineNumber); } /**See if any tone is detected. */ virtual OpalLineInterfaceDevice::CallProgressTones WaitForToneDetect( unsigned timeout = 3000 ///< Milliseconds to wait for ) { return device.WaitForToneDetect(lineNumber, timeout); } /**See if a specific tone is detected. */ virtual PBoolean WaitForTone( OpalLineInterfaceDevice::CallProgressTones tone, ///< Tone to wait for unsigned timeout = 3000 ///< Milliseconds to wait for ) { return device.WaitForTone(lineNumber, tone, timeout); } /**Play a tone. */ virtual PBoolean PlayTone( OpalLineInterfaceDevice::CallProgressTones tone ///< Tone to be played ) { return device.PlayTone(lineNumber, tone); } /**Determine if a tone is still playing */ virtual PBoolean IsTonePlaying() { return device.IsTonePlaying(lineNumber); } /**Stop playing a tone. */ virtual PBoolean StopTone() { return device.StopTone(lineNumber); } /**Dial a number on network line. The takes the line off hook, waits for dial tone, and transmits the specified number as DTMF tones. If the requireTones flag is PTrue the call is aborted of the call progress tones are not detected. Otherwise the call proceeds with short delays while it tries to detect the call progress tones. The return code indicates the following: DialTone No dial tone detected RingTone Dial was successful BusyTone The remote phone was busy ClearTone Dial failed (usually means rang out) NoTone There was an internal error making the call */ virtual OpalLineInterfaceDevice::CallProgressTones DialOut( const PString & number, ///< Number to dial const OpalLineInterfaceDevice::DialParams & params = OpalLineInterfaceDevice::DialParams() ///< Optional parameters for dial out. ) { return device.DialOut(lineNumber, number, params); } //@} /**@name Member variable access */ //@{ /**Get the device this line is on. */ OpalLineInterfaceDevice & GetDevice() const { return device; } /**Get the number of the line on the device. */ unsigned GetLineNumber() const { return lineNumber; } /**Get the token to uniquely identify this line. */ PString GetToken() const { return token; } /**Set the token to uniquely identify this line. */ void SetToken(const PString & t) { token = t; } //@} protected: OpalLineInterfaceDevice & device; unsigned lineNumber; PString token; PTimeInterval ringStoppedTime; PTimeInterval ringInterCadenceTime; PTimeInterval ringTick; unsigned ringCount; bool lastRingState; }; PLIST(OpalLineList, OpalLine); /**This class embodies the description of a Line Interface Device. An application may create a descendent off this class and override the Create() function to make the instance of a class implementing a transcoder. */ class OpalLIDRegistration : public PCaselessString { PCLASSINFO(OpalLIDRegistration, PCaselessString); public: /**@name Construction */ //@{ /**Create a new LID registration. */ OpalLIDRegistration( const char * name ///< Line Interface Device type name ); /**Destroy and remove LID registration. */ ~OpalLIDRegistration(); //@} /**@name Operations */ //@{ /**Create an instance of the transcoder implementation. */ virtual OpalLineInterfaceDevice * Create( void * parameters ///< Arbitrary parameters for the LID ) const = 0; //@} protected: OpalLIDRegistration * link; bool duplicate; friend class OpalLineInterfaceDevice; }; #define OPAL_REGISTER_LID_FUNCTION(cls, type, param) \ static class cls##_Registration : public OpalLIDRegistration { \ public: \ cls##_Registration() : OpalLIDRegistration(type) { } \ OpalLineInterfaceDevice * Create(void * param) const; \ } instance_##cls##_Registration; \ OpalLineInterfaceDevice * cls##_Registration::Create(void * param) const #ifndef OPAL_NO_PARAM #define OPAL_NO_PARAM #endif #define OPAL_REGISTER_LID(cls, type) \ OPAL_REGISTER_LID_FUNCTION(cls, type, OPAL_NO_PARAM) \ { return new cls; } #define OPAL_REGISTER_LID_PARAM(cls, type) \ OPAL_REGISTER_LID_FUNCTION(cls, type, parameter) \ { return new cls(parameter); } #endif // OPAL_LIDS_LID_H // End of File ///////////////////////////////////////////////////////////////